{ "version":"2.0", "metadata":{ "apiVersion":"2017-10-17", "endpointPrefix":"secretsmanager", "jsonVersion":"1.1", "protocol":"json", "serviceFullName":"AWS Secrets Manager", "serviceId":"Secrets Manager", "signatureVersion":"v4", "signingName":"secretsmanager", "targetPrefix":"secretsmanager", "uid":"secretsmanager-2017-10-17" }, "operations":{ "CancelRotateSecret":{ "name":"CancelRotateSecret", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"CancelRotateSecretRequest"}, "output":{"shape":"CancelRotateSecretResponse"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InvalidParameterException"}, {"shape":"InternalServiceError"}, {"shape":"InvalidRequestException"} ], "documentation":"

Disables automatic scheduled rotation and cancels the rotation of a secret if one is currently in progress.

To re-enable scheduled rotation, call RotateSecret with AutomaticallyRotateAfterDays set to a value greater than 0. This will immediately rotate your secret and then enable the automatic schedule.

If you cancel a rotation that is in progress, it can leave the VersionStage labels in an unexpected state. Depending on what step of the rotation was in progress, you might need to remove the staging label AWSPENDING from the partially created version, specified by the VersionId response value. You should also evaluate the partially rotated new version to see if it should be deleted, which you can do by removing all staging labels from the new version's VersionStage field.

To successfully start a rotation, the staging label AWSPENDING must be in one of the following states:

If the staging label AWSPENDING is attached to a different version than the version with AWSCURRENT then the attempt to rotate fails.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "CreateSecret":{ "name":"CreateSecret", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"CreateSecretRequest"}, "output":{"shape":"CreateSecretResponse"}, "errors":[ {"shape":"InvalidParameterException"}, {"shape":"InvalidRequestException"}, {"shape":"LimitExceededException"}, {"shape":"EncryptionFailure"}, {"shape":"ResourceExistsException"}, {"shape":"ResourceNotFoundException"}, {"shape":"MalformedPolicyDocumentException"}, {"shape":"InternalServiceError"}, {"shape":"PreconditionNotMetException"} ], "documentation":"

Creates a new secret. A secret in Secrets Manager consists of both the protected secret data and the important information needed to manage the secret.

Secrets Manager stores the encrypted secret data in one of a collection of \"versions\" associated with the secret. Each version contains a copy of the encrypted secret data. Each version is associated with one or more \"staging labels\" that identify where the version is in the rotation cycle. The SecretVersionsToStages field of the secret contains the mapping of staging labels to the active versions of the secret. Versions without a staging label are considered deprecated and are not included in the list.

You provide the secret data to be encrypted by putting text in either the SecretString parameter or binary data in the SecretBinary parameter, but not both. If you include SecretString or SecretBinary then Secrets Manager also creates an initial secret version and automatically attaches the staging label AWSCURRENT to the new version.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "DeleteResourcePolicy":{ "name":"DeleteResourcePolicy", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"DeleteResourcePolicyRequest"}, "output":{"shape":"DeleteResourcePolicyResponse"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InternalServiceError"}, {"shape":"InvalidRequestException"} ], "documentation":"

Deletes the resource-based permission policy that's attached to the secret.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "DeleteSecret":{ "name":"DeleteSecret", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"DeleteSecretRequest"}, "output":{"shape":"DeleteSecretResponse"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InvalidParameterException"}, {"shape":"InvalidRequestException"}, {"shape":"InternalServiceError"} ], "documentation":"

Deletes an entire secret and all of its versions. You can optionally include a recovery window during which you can restore the secret. If you don't specify a recovery window value, the operation defaults to 30 days. Secrets Manager attaches a DeletionDate stamp to the secret that specifies the end of the recovery window. At the end of the recovery window, Secrets Manager deletes the secret permanently.

At any time before recovery window ends, you can use RestoreSecret to remove the DeletionDate and cancel the deletion of the secret.

You cannot access the encrypted secret information in any secret that is scheduled for deletion. If you need to access that information, you must cancel the deletion with RestoreSecret and then retrieve the information.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "DescribeSecret":{ "name":"DescribeSecret", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"DescribeSecretRequest"}, "output":{"shape":"DescribeSecretResponse"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InternalServiceError"} ], "documentation":"

Retrieves the details of a secret. It does not include the encrypted fields. Only those fields that are populated with a value are returned in the response.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "GetRandomPassword":{ "name":"GetRandomPassword", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"GetRandomPasswordRequest"}, "output":{"shape":"GetRandomPasswordResponse"}, "errors":[ {"shape":"InvalidParameterException"}, {"shape":"InvalidRequestException"}, {"shape":"InternalServiceError"} ], "documentation":"

Generates a random password of the specified complexity. This operation is intended for use in the Lambda rotation function. Per best practice, we recommend that you specify the maximum length and include every character type that the system you are generating a password for can support.

Minimum permissions

To run this command, you must have the following permissions:

" }, "GetResourcePolicy":{ "name":"GetResourcePolicy", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"GetResourcePolicyRequest"}, "output":{"shape":"GetResourcePolicyResponse"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InternalServiceError"}, {"shape":"InvalidRequestException"} ], "documentation":"

Retrieves the JSON text of the resource-based policy document that's attached to the specified secret. The JSON request string input and response output are shown formatted with white space and line breaks for better readability. Submit your input as a single line JSON string.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "GetSecretValue":{ "name":"GetSecretValue", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"GetSecretValueRequest"}, "output":{"shape":"GetSecretValueResponse"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InvalidParameterException"}, {"shape":"InvalidRequestException"}, {"shape":"DecryptionFailure"}, {"shape":"InternalServiceError"} ], "documentation":"

Retrieves the contents of the encrypted fields SecretString or SecretBinary from the specified version of a secret, whichever contains content.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "ListSecretVersionIds":{ "name":"ListSecretVersionIds", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"ListSecretVersionIdsRequest"}, "output":{"shape":"ListSecretVersionIdsResponse"}, "errors":[ {"shape":"InvalidNextTokenException"}, {"shape":"ResourceNotFoundException"}, {"shape":"InternalServiceError"} ], "documentation":"

Lists all of the versions attached to the specified secret. The output does not include the SecretString or SecretBinary fields. By default, the list includes only versions that have at least one staging label in VersionStage attached.

Always check the NextToken response parameter when calling any of the List* operations. These operations can occasionally return an empty or shorter than expected list of results even when there are more results available. When this happens, the NextToken response parameter contains a value to pass to the next call to the same API to request the next part of the list.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "ListSecrets":{ "name":"ListSecrets", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"ListSecretsRequest"}, "output":{"shape":"ListSecretsResponse"}, "errors":[ {"shape":"InvalidParameterException"}, {"shape":"InvalidNextTokenException"}, {"shape":"InternalServiceError"} ], "documentation":"

Lists all of the secrets that are stored by Secrets Manager in the AWS account. To list the versions currently stored for a specific secret, use ListSecretVersionIds. The encrypted fields SecretString and SecretBinary are not included in the output. To get that information, call the GetSecretValue operation.

Always check the NextToken response parameter when calling any of the List* operations. These operations can occasionally return an empty or shorter than expected list of results even when there are more results available. When this happens, the NextToken response parameter contains a value to pass to the next call to the same API to request the next part of the list.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "PutResourcePolicy":{ "name":"PutResourcePolicy", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"PutResourcePolicyRequest"}, "output":{"shape":"PutResourcePolicyResponse"}, "errors":[ {"shape":"MalformedPolicyDocumentException"}, {"shape":"ResourceNotFoundException"}, {"shape":"InvalidParameterException"}, {"shape":"InternalServiceError"}, {"shape":"InvalidRequestException"} ], "documentation":"

Attaches the contents of the specified resource-based permission policy to a secret. A resource-based policy is optional. Alternatively, you can use IAM identity-based policies that specify the secret's Amazon Resource Name (ARN) in the policy statement's Resources element. You can also use a combination of both identity-based and resource-based policies. The affected users and roles receive the permissions that are permitted by all of the relevant policies. For more information, see Using Resource-Based Policies for AWS Secrets Manager. For the complete description of the AWS policy syntax and grammar, see IAM JSON Policy Reference in the IAM User Guide.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "PutSecretValue":{ "name":"PutSecretValue", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"PutSecretValueRequest"}, "output":{"shape":"PutSecretValueResponse"}, "errors":[ {"shape":"InvalidParameterException"}, {"shape":"InvalidRequestException"}, {"shape":"LimitExceededException"}, {"shape":"EncryptionFailure"}, {"shape":"ResourceExistsException"}, {"shape":"ResourceNotFoundException"}, {"shape":"InternalServiceError"} ], "documentation":"

Stores a new encrypted secret value in the specified secret. To do this, the operation creates a new version and attaches it to the secret. The version can contain a new SecretString value or a new SecretBinary value. You can also specify the staging labels that are initially attached to the new version.

The Secrets Manager console uses only the SecretString field. To add binary data to a secret with the SecretBinary field you must use the AWS CLI or one of the AWS SDKs.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "RestoreSecret":{ "name":"RestoreSecret", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"RestoreSecretRequest"}, "output":{"shape":"RestoreSecretResponse"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InvalidParameterException"}, {"shape":"InvalidRequestException"}, {"shape":"InternalServiceError"} ], "documentation":"

Cancels the scheduled deletion of a secret by removing the DeletedDate time stamp. This makes the secret accessible to query once again.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "RotateSecret":{ "name":"RotateSecret", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"RotateSecretRequest"}, "output":{"shape":"RotateSecretResponse"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InvalidParameterException"}, {"shape":"InternalServiceError"}, {"shape":"InvalidRequestException"} ], "documentation":"

Configures and starts the asynchronous process of rotating this secret. If you include the configuration parameters, the operation sets those values for the secret and then immediately starts a rotation. If you do not include the configuration parameters, the operation starts a rotation with the values already stored in the secret. After the rotation completes, the protected service and its clients all use the new version of the secret.

This required configuration information includes the ARN of an AWS Lambda function and the time between scheduled rotations. The Lambda rotation function creates a new version of the secret and creates or updates the credentials on the protected service to match. After testing the new credentials, the function marks the new secret with the staging label AWSCURRENT so that your clients all immediately begin to use the new version. For more information about rotating secrets and how to configure a Lambda function to rotate the secrets for your protected service, see Rotating Secrets in AWS Secrets Manager in the AWS Secrets Manager User Guide.

Secrets Manager schedules the next rotation when the previous one is complete. Secrets Manager schedules the date by adding the rotation interval (number of days) to the actual date of the last rotation. The service chooses the hour within that 24-hour date window randomly. The minute is also chosen somewhat randomly, but weighted towards the top of the hour and influenced by a variety of factors that help distribute load.

The rotation function must end with the versions of the secret in one of two states:

If instead the AWSPENDING staging label is present but is not attached to the same version as AWSCURRENT then any later invocation of RotateSecret assumes that a previous rotation request is still in progress and returns an error.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "TagResource":{ "name":"TagResource", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"TagResourceRequest"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InvalidRequestException"}, {"shape":"InvalidParameterException"}, {"shape":"InternalServiceError"} ], "documentation":"

Attaches one or more tags, each consisting of a key name and a value, to the specified secret. Tags are part of the secret's overall metadata, and are not associated with any specific version of the secret. This operation only appends tags to the existing list of tags. To remove tags, you must use UntagResource.

The following basic restrictions apply to tags:

If you use tags as part of your security strategy, then adding or removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "UntagResource":{ "name":"UntagResource", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"UntagResourceRequest"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InvalidRequestException"}, {"shape":"InvalidParameterException"}, {"shape":"InternalServiceError"} ], "documentation":"

Removes one or more tags from the specified secret.

This operation is idempotent. If a requested tag is not attached to the secret, no error is returned and the secret metadata is unchanged.

If you use tags as part of your security strategy, then removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "UpdateSecret":{ "name":"UpdateSecret", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"UpdateSecretRequest"}, "output":{"shape":"UpdateSecretResponse"}, "errors":[ {"shape":"InvalidParameterException"}, {"shape":"InvalidRequestException"}, {"shape":"LimitExceededException"}, {"shape":"EncryptionFailure"}, {"shape":"ResourceExistsException"}, {"shape":"ResourceNotFoundException"}, {"shape":"MalformedPolicyDocumentException"}, {"shape":"InternalServiceError"}, {"shape":"PreconditionNotMetException"} ], "documentation":"

Modifies many of the details of the specified secret. If you include a ClientRequestToken and either SecretString or SecretBinary then it also creates a new version attached to the secret.

To modify the rotation configuration of a secret, use RotateSecret instead.

The Secrets Manager console uses only the SecretString parameter and therefore limits you to encrypting and storing only a text string. To encrypt and store binary data as part of the version of a secret, you must use either the AWS CLI or one of the AWS SDKs.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" }, "UpdateSecretVersionStage":{ "name":"UpdateSecretVersionStage", "http":{ "method":"POST", "requestUri":"/" }, "input":{"shape":"UpdateSecretVersionStageRequest"}, "output":{"shape":"UpdateSecretVersionStageResponse"}, "errors":[ {"shape":"ResourceNotFoundException"}, {"shape":"InvalidParameterException"}, {"shape":"InvalidRequestException"}, {"shape":"LimitExceededException"}, {"shape":"InternalServiceError"} ], "documentation":"

Modifies the staging labels attached to a version of a secret. Staging labels are used to track a version as it progresses through the secret rotation process. You can attach a staging label to only one version of a secret at a time. If a staging label to be added is already attached to another version, then it is moved--removed from the other version first and then attached to this one. For more information about staging labels, see Staging Labels in the AWS Secrets Manager User Guide.

The staging labels that you specify in the VersionStage parameter are added to the existing list of staging labels--they don't replace it.

You can move the AWSCURRENT staging label to this version by including it in this call.

Whenever you move AWSCURRENT, Secrets Manager automatically moves the label AWSPREVIOUS to the version that AWSCURRENT was removed from.

If this action results in the last label being removed from a version, then the version is considered to be 'deprecated' and can be deleted by Secrets Manager.

Minimum permissions

To run this command, you must have the following permissions:

Related operations

" } }, "shapes":{ "AutomaticallyRotateAfterDaysType":{ "type":"long", "max":1000, "min":1 }, "BooleanType":{"type":"boolean"}, "CancelRotateSecretRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret for which you want to cancel a rotation request. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" } } }, "CancelRotateSecretResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret for which rotation was canceled.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret for which rotation was canceled.

" }, "VersionId":{ "shape":"SecretVersionIdType", "documentation":"

The unique identifier of the version of the secret that was created during the rotation. This version might not be complete, and should be evaluated for possible deletion. At the very least, you should remove the VersionStage value AWSPENDING to enable this version to be deleted. Failing to clean up a cancelled rotation can block you from successfully starting future rotations.

" } } }, "ClientRequestTokenType":{ "type":"string", "max":64, "min":32 }, "CreateSecretRequest":{ "type":"structure", "required":["Name"], "members":{ "Name":{ "shape":"NameType", "documentation":"

Specifies the friendly name of the new secret.

The secret name must be ASCII letters, digits, or the following characters : /_+=.@-

Don't end your secret name with a hyphen followed by six characters. If you do so, you risk confusion and unexpected results when searching for a secret by partial ARN. This is because Secrets Manager automatically adds a hyphen and six random characters at the end of the ARN.

" }, "ClientRequestToken":{ "shape":"ClientRequestTokenType", "documentation":"

(Optional) If you include SecretString or SecretBinary, then an initial version is created as part of the secret, and this parameter specifies a unique identifier for the new version.

If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes it as the value for this parameter in the request. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for the new version and include that value in the request.

This value helps ensure idempotency. Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during a rotation. We recommend that you generate a UUID-type value to ensure uniqueness of your versions within the specified secret.

This value becomes the VersionId of the new version.

", "idempotencyToken":true }, "Description":{ "shape":"DescriptionType", "documentation":"

(Optional) Specifies a user-provided description of the secret.

" }, "KmsKeyId":{ "shape":"KmsKeyIdType", "documentation":"

(Optional) Specifies the ARN, Key ID, or alias of the AWS KMS customer master key (CMK) to be used to encrypt the SecretString or SecretBinary values in the versions stored in this secret.

You can specify any of the supported ways to identify a AWS KMS key ID. If you need to reference a CMK in a different account, you can use only the key ARN or the alias ARN.

If you don't specify this value, then Secrets Manager defaults to using the AWS account's default CMK (the one named aws/secretsmanager). If a AWS KMS CMK with that name doesn't yet exist, then Secrets Manager creates it for you automatically the first time it needs to encrypt a version's SecretString or SecretBinary fields.

You can use the account's default CMK to encrypt and decrypt only if you call this operation using credentials from the same account that owns the secret. If the secret is in a different account, then you must create a custom CMK and specify the ARN in this field.

" }, "SecretBinary":{ "shape":"SecretBinaryType", "documentation":"

(Optional) Specifies binary data that you want to encrypt and store in the new version of the secret. To use this parameter in the command-line tools, we recommend that you store your binary data in a file and then use the appropriate technique for your tool to pass the contents of the file as a parameter.

Either SecretString or SecretBinary must have a value, but not both. They cannot both be empty.

This parameter is not available using the Secrets Manager console. It can be accessed only by using the AWS CLI or one of the AWS SDKs.

" }, "SecretString":{ "shape":"SecretStringType", "documentation":"

(Optional) Specifies text data that you want to encrypt and store in this new version of the secret.

Either SecretString or SecretBinary must have a value, but not both. They cannot both be empty.

If you create a secret by using the Secrets Manager console then Secrets Manager puts the protected secret text in only the SecretString parameter. The Secrets Manager console stores the information as a JSON structure of key/value pairs that the Lambda rotation function knows how to parse.

For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide. For example:

[{\"username\":\"bob\"},{\"password\":\"abc123xyz456\"}]

If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.

" }, "Tags":{ "shape":"TagListType", "documentation":"

(Optional) Specifies a list of user-defined tags that are attached to the secret. Each tag is a \"Key\" and \"Value\" pair of strings. This operation only appends tags to the existing list of tags. To remove tags, you must use UntagResource.

This parameter requires a JSON text string argument. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide. For example:

[{\"Key\":\"CostCenter\",\"Value\":\"12345\"},{\"Key\":\"environment\",\"Value\":\"production\"}]

If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.

The following basic restrictions apply to tags:

" } } }, "CreateSecretResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The Amazon Resource Name (ARN) of the secret that you just created.

Secrets Manager automatically adds several random characters to the name at the end of the ARN when you initially create a secret. This affects only the ARN and not the actual friendly name. This ensures that if you create a new secret with the same name as an old secret that you previously deleted, then users with access to the old secret don't automatically get access to the new secret because the ARNs are different.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret that you just created.

" }, "VersionId":{ "shape":"SecretVersionIdType", "documentation":"

The unique identifier that's associated with the version of the secret you just created.

" } } }, "CreatedDateType":{"type":"timestamp"}, "DecryptionFailure":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

Secrets Manager can't decrypt the protected secret text using the provided KMS key.

", "exception":true }, "DeleteResourcePolicyRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret that you want to delete the attached resource-based policy for. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" } } }, "DeleteResourcePolicyResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret that the resource-based policy was deleted for.

" }, "Name":{ "shape":"NameType", "documentation":"

The friendly name of the secret that the resource-based policy was deleted for.

" } } }, "DeleteSecretRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret that you want to delete. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "RecoveryWindowInDays":{ "shape":"RecoveryWindowInDaysType", "documentation":"

(Optional) Specifies the number of days that Secrets Manager waits before it can delete the secret. You can't use both this parameter and the ForceDeleteWithoutRecovery parameter in the same API call.

This value can range from 7 to 30 days. The default value is 30.

", "box":true }, "ForceDeleteWithoutRecovery":{ "shape":"BooleanType", "documentation":"

(Optional) Specifies that the secret is to be deleted without any recovery window. You can't use both this parameter and the RecoveryWindowInDays parameter in the same API call.

An asynchronous background process performs the actual deletion, so there can be a short delay before the operation completes. If you write code to delete and then immediately recreate a secret with the same name, ensure that your code includes appropriate back off and retry logic.

Use this parameter with caution. This parameter causes the operation to skip the normal waiting period before the permanent deletion that AWS would normally impose with the RecoveryWindowInDays parameter. If you delete a secret with the ForceDeleteWithouRecovery parameter, then you have no opportunity to recover the secret. It is permanently lost.

", "box":true } } }, "DeleteSecretResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret that is now scheduled for deletion.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret that is now scheduled for deletion.

" }, "DeletionDate":{ "shape":"DeletionDateType", "documentation":"

The date and time after which this secret can be deleted by Secrets Manager and can no longer be restored. This value is the date and time of the delete request plus the number of days specified in RecoveryWindowInDays.

", "box":true } } }, "DeletedDateType":{"type":"timestamp"}, "DeletionDateType":{"type":"timestamp"}, "DescribeSecretRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

The identifier of the secret whose details you want to retrieve. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" } } }, "DescribeSecretResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The user-provided friendly name of the secret.

" }, "Description":{ "shape":"DescriptionType", "documentation":"

The user-provided description of the secret.

" }, "KmsKeyId":{ "shape":"KmsKeyIdType", "documentation":"

The ARN or alias of the AWS KMS customer master key (CMK) that's used to encrypt the SecretString or SecretBinary fields in each version of the secret. If you don't provide a key, then Secrets Manager defaults to encrypting the secret fields with the default AWS KMS CMK (the one named awssecretsmanager) for this account.

" }, "RotationEnabled":{ "shape":"RotationEnabledType", "documentation":"

Specifies whether automatic rotation is enabled for this secret.

To enable rotation, use RotateSecret with AutomaticallyRotateAfterDays set to a value greater than 0. To disable rotation, use CancelRotateSecret.

", "box":true }, "RotationLambdaARN":{ "shape":"RotationLambdaARNType", "documentation":"

The ARN of a Lambda function that's invoked by Secrets Manager to rotate the secret either automatically per the schedule or manually by a call to RotateSecret.

" }, "RotationRules":{ "shape":"RotationRulesType", "documentation":"

A structure that contains the rotation configuration for this secret.

" }, "LastRotatedDate":{ "shape":"LastRotatedDateType", "documentation":"

The most recent date and time that the Secrets Manager rotation process was successfully completed. This value is null if the secret has never rotated.

", "box":true }, "LastChangedDate":{ "shape":"LastChangedDateType", "documentation":"

The last date and time that this secret was modified in any way.

", "box":true }, "LastAccessedDate":{ "shape":"LastAccessedDateType", "documentation":"

The last date that this secret was accessed. This value is truncated to midnight of the date and therefore shows only the date, not the time.

", "box":true }, "DeletedDate":{ "shape":"DeletedDateType", "documentation":"

This value exists if the secret is scheduled for deletion. Some time after the specified date and time, Secrets Manager deletes the secret and all of its versions.

If a secret is scheduled for deletion, then its details, including the encrypted secret information, is not accessible. To cancel a scheduled deletion and restore access, use RestoreSecret.

", "box":true }, "Tags":{ "shape":"TagListType", "documentation":"

The list of user-defined tags that are associated with the secret. To add tags to a secret, use TagResource. To remove tags, use UntagResource.

" }, "VersionIdsToStages":{ "shape":"SecretVersionsToStagesMapType", "documentation":"

A list of all of the currently assigned VersionStage staging labels and the VersionId that each is attached to. Staging labels are used to keep track of the different versions during the rotation process.

A version that does not have any staging labels attached is considered deprecated and subject to deletion. Such versions are not included in this list.

" }, "OwningService":{ "shape":"OwningServiceType", "documentation":"

Returns the name of the service that created this secret.

" } } }, "DescriptionType":{ "type":"string", "max":2048 }, "EncryptionFailure":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

Secrets Manager can't encrypt the protected secret text using the provided KMS key. Check that the customer master key (CMK) is available, enabled, and not in an invalid state. For more information, see How Key State Affects Use of a Customer Master Key.

", "exception":true }, "ErrorMessage":{"type":"string"}, "ExcludeCharactersType":{ "type":"string", "max":4096, "min":0 }, "ExcludeLowercaseType":{"type":"boolean"}, "ExcludeNumbersType":{"type":"boolean"}, "ExcludePunctuationType":{"type":"boolean"}, "ExcludeUppercaseType":{"type":"boolean"}, "GetRandomPasswordRequest":{ "type":"structure", "members":{ "PasswordLength":{ "shape":"PasswordLengthType", "documentation":"

The desired length of the generated password. The default value if you do not include this parameter is 32 characters.

", "box":true }, "ExcludeCharacters":{ "shape":"ExcludeCharactersType", "documentation":"

A string that includes characters that should not be included in the generated password. The default is that all characters from the included sets can be used.

" }, "ExcludeNumbers":{ "shape":"ExcludeNumbersType", "documentation":"

Specifies that the generated password should not include digits. The default if you do not include this switch parameter is that digits can be included.

", "box":true }, "ExcludePunctuation":{ "shape":"ExcludePunctuationType", "documentation":"

Specifies that the generated password should not include punctuation characters. The default if you do not include this switch parameter is that punctuation characters can be included.

The following are the punctuation characters that can be included in the generated password if you don't explicitly exclude them with ExcludeCharacters or ExcludePunctuation:

! \" # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \\ ] ^ _ ` { | } ~

", "box":true }, "ExcludeUppercase":{ "shape":"ExcludeUppercaseType", "documentation":"

Specifies that the generated password should not include uppercase letters. The default if you do not include this switch parameter is that uppercase letters can be included.

", "box":true }, "ExcludeLowercase":{ "shape":"ExcludeLowercaseType", "documentation":"

Specifies that the generated password should not include lowercase letters. The default if you do not include this switch parameter is that lowercase letters can be included.

", "box":true }, "IncludeSpace":{ "shape":"IncludeSpaceType", "documentation":"

Specifies that the generated password can include the space character. The default if you do not include this switch parameter is that the space character is not included.

", "box":true }, "RequireEachIncludedType":{ "shape":"RequireEachIncludedTypeType", "documentation":"

A boolean value that specifies whether the generated password must include at least one of every allowed character type. The default value is True and the operation requires at least one of every character type.

", "box":true } } }, "GetRandomPasswordResponse":{ "type":"structure", "members":{ "RandomPassword":{ "shape":"RandomPasswordType", "documentation":"

A string with the generated password.

" } } }, "GetResourcePolicyRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret that you want to retrieve the attached resource-based policy for. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" } } }, "GetResourcePolicyResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret that the resource-based policy was retrieved for.

" }, "Name":{ "shape":"NameType", "documentation":"

The friendly name of the secret that the resource-based policy was retrieved for.

" }, "ResourcePolicy":{ "shape":"NonEmptyResourcePolicyType", "documentation":"

A JSON-formatted string that describes the permissions that are associated with the attached secret. These permissions are combined with any permissions that are associated with the user or role that attempts to access this secret. The combined permissions specify who can access the secret and what actions they can perform. For more information, see Authentication and Access Control for AWS Secrets Manager in the AWS Secrets Manager User Guide.

" } } }, "GetSecretValueRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret containing the version that you want to retrieve. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "VersionId":{ "shape":"SecretVersionIdType", "documentation":"

Specifies the unique identifier of the version of the secret that you want to retrieve. If you specify this parameter then don't specify VersionStage. If you don't specify either a VersionStage or VersionId then the default is to perform the operation on the version with the VersionStage value of AWSCURRENT.

This value is typically a UUID-type value with 32 hexadecimal digits.

" }, "VersionStage":{ "shape":"SecretVersionStageType", "documentation":"

Specifies the secret version that you want to retrieve by the staging label attached to the version.

Staging labels are used to keep track of different versions during the rotation process. If you use this parameter then don't specify VersionId. If you don't specify either a VersionStage or VersionId, then the default is to perform the operation on the version with the VersionStage value of AWSCURRENT.

" } } }, "GetSecretValueResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret.

" }, "VersionId":{ "shape":"SecretVersionIdType", "documentation":"

The unique identifier of this version of the secret.

" }, "SecretBinary":{ "shape":"SecretBinaryType", "documentation":"

The decrypted part of the protected secret information that was originally provided as binary data in the form of a byte array. The response parameter represents the binary data as a base64-encoded string.

This parameter is not used if the secret is created by the Secrets Manager console.

If you store custom information in this field of the secret, then you must code your Lambda rotation function to parse and interpret whatever you store in the SecretString or SecretBinary fields.

" }, "SecretString":{ "shape":"SecretStringType", "documentation":"

The decrypted part of the protected secret information that was originally provided as a string.

If you create this secret by using the Secrets Manager console then only the SecretString parameter contains data. Secrets Manager stores the information as a JSON structure of key/value pairs that the Lambda rotation function knows how to parse.

If you store custom information in the secret by using the CreateSecret, UpdateSecret, or PutSecretValue API operations instead of the Secrets Manager console, or by using the Other secret type in the console, then you must code your Lambda rotation function to parse and interpret those values.

" }, "VersionStages":{ "shape":"SecretVersionStagesType", "documentation":"

A list of all of the staging labels currently attached to this version of the secret.

" }, "CreatedDate":{ "shape":"CreatedDateType", "documentation":"

The date and time that this version of the secret was created.

", "box":true } } }, "IncludeSpaceType":{"type":"boolean"}, "InternalServiceError":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

An error occurred on the server side.

", "exception":true, "fault":true }, "InvalidNextTokenException":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

You provided an invalid NextToken value.

", "exception":true }, "InvalidParameterException":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

You provided an invalid value for a parameter.

", "exception":true }, "InvalidRequestException":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

You provided a parameter value that is not valid for the current state of the resource.

Possible causes:

", "exception":true }, "KmsKeyIdType":{ "type":"string", "max":2048, "min":0 }, "LastAccessedDateType":{"type":"timestamp"}, "LastChangedDateType":{"type":"timestamp"}, "LastRotatedDateType":{"type":"timestamp"}, "LimitExceededException":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

The request failed because it would exceed one of the Secrets Manager internal limits.

", "exception":true }, "ListSecretVersionIdsRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

The identifier for the secret containing the versions you want to list. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "MaxResults":{ "shape":"MaxResultsType", "documentation":"

(Optional) Limits the number of results that you want to include in the response. If you don't include this parameter, it defaults to a value that's specific to the operation. If additional items exist beyond the maximum you specify, the NextToken response element is present and has a value (isn't null). Include that value as the NextToken request parameter in the next call to the operation to get the next part of the results. Note that Secrets Manager might return fewer results than the maximum even when there are more results available. You should check NextToken after every operation to ensure that you receive all of the results.

", "box":true }, "NextToken":{ "shape":"NextTokenType", "documentation":"

(Optional) Use this parameter in a request if you receive a NextToken response in a previous request that indicates that there's more output available. In a subsequent call, set it to the value of the previous call's NextToken response to indicate where the output should continue from.

" }, "IncludeDeprecated":{ "shape":"BooleanType", "documentation":"

(Optional) Specifies that you want the results to include versions that do not have any staging labels attached to them. Such versions are considered deprecated and are subject to deletion by Secrets Manager as needed.

", "box":true } } }, "ListSecretVersionIdsResponse":{ "type":"structure", "members":{ "Versions":{ "shape":"SecretVersionsListType", "documentation":"

The list of the currently available versions of the specified secret.

" }, "NextToken":{ "shape":"NextTokenType", "documentation":"

If present in the response, this value indicates that there's more output available than what's included in the current response. This can occur even when the response includes no values at all, such as when you ask for a filtered view of a very long list. Use this value in the NextToken request parameter in a subsequent call to the operation to continue processing and get the next part of the output. You should repeat this until the NextToken response element comes back empty (as null).

" }, "ARN":{ "shape":"SecretARNType", "documentation":"

The Amazon Resource Name (ARN) for the secret.

Secrets Manager automatically adds several random characters to the name at the end of the ARN when you initially create a secret. This affects only the ARN and not the actual friendly name. This ensures that if you create a new secret with the same name as an old secret that you previously deleted, then users with access to the old secret don't automatically get access to the new secret because the ARNs are different.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret.

" } } }, "ListSecretsRequest":{ "type":"structure", "members":{ "MaxResults":{ "shape":"MaxResultsType", "documentation":"

(Optional) Limits the number of results that you want to include in the response. If you don't include this parameter, it defaults to a value that's specific to the operation. If additional items exist beyond the maximum you specify, the NextToken response element is present and has a value (isn't null). Include that value as the NextToken request parameter in the next call to the operation to get the next part of the results. Note that Secrets Manager might return fewer results than the maximum even when there are more results available. You should check NextToken after every operation to ensure that you receive all of the results.

", "box":true }, "NextToken":{ "shape":"NextTokenType", "documentation":"

(Optional) Use this parameter in a request if you receive a NextToken response in a previous request that indicates that there's more output available. In a subsequent call, set it to the value of the previous call's NextToken response to indicate where the output should continue from.

" } } }, "ListSecretsResponse":{ "type":"structure", "members":{ "SecretList":{ "shape":"SecretListType", "documentation":"

A list of the secrets in the account.

" }, "NextToken":{ "shape":"NextTokenType", "documentation":"

If present in the response, this value indicates that there's more output available than what's included in the current response. This can occur even when the response includes no values at all, such as when you ask for a filtered view of a very long list. Use this value in the NextToken request parameter in a subsequent call to the operation to continue processing and get the next part of the output. You should repeat this until the NextToken response element comes back empty (as null).

" } } }, "MalformedPolicyDocumentException":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

The policy document that you provided isn't valid.

", "exception":true }, "MaxResultsType":{ "type":"integer", "max":100, "min":1 }, "NameType":{ "type":"string", "max":512, "min":1 }, "NextTokenType":{ "type":"string", "max":4096, "min":1 }, "NonEmptyResourcePolicyType":{ "type":"string", "max":20480, "min":1 }, "OwningServiceType":{ "type":"string", "max":128, "min":1 }, "PasswordLengthType":{ "type":"long", "max":4096, "min":1 }, "PreconditionNotMetException":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

The request failed because you did not complete all the prerequisite steps.

", "exception":true }, "PutResourcePolicyRequest":{ "type":"structure", "required":[ "SecretId", "ResourcePolicy" ], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret that you want to attach the resource-based policy to. You can specify either the ARN or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "ResourcePolicy":{ "shape":"NonEmptyResourcePolicyType", "documentation":"

A JSON-formatted string that's constructed according to the grammar and syntax for an AWS resource-based policy. The policy in the string identifies who can access or manage this secret and its versions. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide.

" } } }, "PutResourcePolicyResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret that the resource-based policy was retrieved for.

" }, "Name":{ "shape":"NameType", "documentation":"

The friendly name of the secret that the resource-based policy was retrieved for.

" } } }, "PutSecretValueRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret to which you want to add a new version. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret. The secret must already exist.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "ClientRequestToken":{ "shape":"ClientRequestTokenType", "documentation":"

(Optional) Specifies a unique identifier for the new version of the secret.

If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes that in the request. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for new versions and include that value in the request.

This value helps ensure idempotency. Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the Lambda rotation function's processing. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.

This value becomes the VersionId of the new version.

", "idempotencyToken":true }, "SecretBinary":{ "shape":"SecretBinaryType", "documentation":"

(Optional) Specifies binary data that you want to encrypt and store in the new version of the secret. To use this parameter in the command-line tools, we recommend that you store your binary data in a file and then use the appropriate technique for your tool to pass the contents of the file as a parameter. Either SecretBinary or SecretString must have a value, but not both. They cannot both be empty.

This parameter is not accessible if the secret using the Secrets Manager console.

" }, "SecretString":{ "shape":"SecretStringType", "documentation":"

(Optional) Specifies text data that you want to encrypt and store in this new version of the secret. Either SecretString or SecretBinary must have a value, but not both. They cannot both be empty.

If you create this secret by using the Secrets Manager console then Secrets Manager puts the protected secret text in only the SecretString parameter. The Secrets Manager console stores the information as a JSON structure of key/value pairs that the default Lambda rotation function knows how to parse.

For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide.

For example:

[{\"username\":\"bob\"},{\"password\":\"abc123xyz456\"}]

If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.

" }, "VersionStages":{ "shape":"SecretVersionStagesType", "documentation":"

(Optional) Specifies a list of staging labels that are attached to this version of the secret. These staging labels are used to track the versions through the rotation process by the Lambda rotation function.

A staging label must be unique to a single version of the secret. If you specify a staging label that's already associated with a different version of the same secret then that staging label is automatically removed from the other version and attached to this version.

If you do not specify a value for VersionStages then Secrets Manager automatically moves the staging label AWSCURRENT to this new version.

" } } }, "PutSecretValueResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The Amazon Resource Name (ARN) for the secret for which you just created a version.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret for which you just created or updated a version.

" }, "VersionId":{ "shape":"SecretVersionIdType", "documentation":"

The unique identifier of the version of the secret you just created or updated.

" }, "VersionStages":{ "shape":"SecretVersionStagesType", "documentation":"

The list of staging labels that are currently attached to this version of the secret. Staging labels are used to track a version as it progresses through the secret rotation process.

" } } }, "RandomPasswordType":{ "type":"string", "max":4096, "min":0, "sensitive":true }, "RecoveryWindowInDaysType":{"type":"long"}, "RequireEachIncludedTypeType":{"type":"boolean"}, "ResourceExistsException":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

A resource with the ID you requested already exists.

", "exception":true }, "ResourceNotFoundException":{ "type":"structure", "members":{ "Message":{"shape":"ErrorMessage"} }, "documentation":"

We can't find the resource that you asked for.

", "exception":true }, "RestoreSecretRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret that you want to restore from a previously scheduled deletion. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" } } }, "RestoreSecretResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret that was restored.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret that was restored.

" } } }, "RotateSecretRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret that you want to rotate. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "ClientRequestToken":{ "shape":"ClientRequestTokenType", "documentation":"

(Optional) Specifies a unique identifier for the new version of the secret that helps ensure idempotency.

If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes that in the request for this parameter. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for new versions and include that value in the request.

You only need to specify your own value if you are implementing your own retry logic and want to ensure that a given secret is not created twice. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.

Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the function's processing. This value becomes the VersionId of the new version.

", "idempotencyToken":true }, "RotationLambdaARN":{ "shape":"RotationLambdaARNType", "documentation":"

(Optional) Specifies the ARN of the Lambda function that can rotate the secret.

" }, "RotationRules":{ "shape":"RotationRulesType", "documentation":"

A structure that defines the rotation configuration for this secret.

" } } }, "RotateSecretResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret.

" }, "VersionId":{ "shape":"SecretVersionIdType", "documentation":"

The ID of the new version of the secret created by the rotation started by this request.

", "box":true } } }, "RotationEnabledType":{"type":"boolean"}, "RotationLambdaARNType":{ "type":"string", "max":2048, "min":0 }, "RotationRulesType":{ "type":"structure", "members":{ "AutomaticallyAfterDays":{ "shape":"AutomaticallyRotateAfterDaysType", "documentation":"

Specifies the number of days between automatic scheduled rotations of the secret.

Secrets Manager schedules the next rotation when the previous one is complete. Secrets Manager schedules the date by adding the rotation interval (number of days) to the actual date of the last rotation. The service chooses the hour within that 24-hour date window randomly. The minute is also chosen somewhat randomly, but weighted towards the top of the hour and influenced by a variety of factors that help distribute load.

", "box":true } }, "documentation":"

A structure that defines the rotation configuration for the secret.

" }, "SecretARNType":{ "type":"string", "max":2048, "min":20 }, "SecretBinaryType":{ "type":"blob", "max":65536, "min":0, "sensitive":true }, "SecretIdType":{ "type":"string", "max":2048, "min":1 }, "SecretListEntry":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The Amazon Resource Name (ARN) of the secret.

For more information about ARNs in Secrets Manager, see Policy Resources in the AWS Secrets Manager User Guide.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret. You can use forward slashes in the name to represent a path hierarchy. For example, /prod/databases/dbserver1 could represent the secret for a server named dbserver1 in the folder databases in the folder prod.

" }, "Description":{ "shape":"DescriptionType", "documentation":"

The user-provided description of the secret.

" }, "KmsKeyId":{ "shape":"KmsKeyIdType", "documentation":"

The ARN or alias of the AWS KMS customer master key (CMK) that's used to encrypt the SecretString and SecretBinary fields in each version of the secret. If you don't provide a key, then Secrets Manager defaults to encrypting the secret fields with the default KMS CMK (the one named awssecretsmanager) for this account.

" }, "RotationEnabled":{ "shape":"RotationEnabledType", "documentation":"

Indicates whether automatic, scheduled rotation is enabled for this secret.

", "box":true }, "RotationLambdaARN":{ "shape":"RotationLambdaARNType", "documentation":"

The ARN of an AWS Lambda function that's invoked by Secrets Manager to rotate and expire the secret either automatically per the schedule or manually by a call to RotateSecret.

" }, "RotationRules":{ "shape":"RotationRulesType", "documentation":"

A structure that defines the rotation configuration for the secret.

" }, "LastRotatedDate":{ "shape":"LastRotatedDateType", "documentation":"

The last date and time that the rotation process for this secret was invoked.

", "box":true }, "LastChangedDate":{ "shape":"LastChangedDateType", "documentation":"

The last date and time that this secret was modified in any way.

", "box":true }, "LastAccessedDate":{ "shape":"LastAccessedDateType", "documentation":"

The last date that this secret was accessed. This value is truncated to midnight of the date and therefore shows only the date, not the time.

", "box":true }, "DeletedDate":{ "shape":"DeletedDateType", "documentation":"

The date and time on which this secret was deleted. Not present on active secrets. The secret can be recovered until the number of days in the recovery window has passed, as specified in the RecoveryWindowInDays parameter of the DeleteSecret operation.

" }, "Tags":{ "shape":"TagListType", "documentation":"

The list of user-defined tags that are associated with the secret. To add tags to a secret, use TagResource. To remove tags, use UntagResource.

" }, "SecretVersionsToStages":{ "shape":"SecretVersionsToStagesMapType", "documentation":"

A list of all of the currently assigned SecretVersionStage staging labels and the SecretVersionId that each is attached to. Staging labels are used to keep track of the different versions during the rotation process.

A version that does not have any SecretVersionStage is considered deprecated and subject to deletion. Such versions are not included in this list.

" }, "OwningService":{ "shape":"OwningServiceType", "documentation":"

Returns the name of the service that created the secret.

" } }, "documentation":"

A structure that contains the details about a secret. It does not include the encrypted SecretString and SecretBinary values. To get those values, use the GetSecretValue operation.

" }, "SecretListType":{ "type":"list", "member":{"shape":"SecretListEntry"} }, "SecretNameType":{ "type":"string", "max":256, "min":1 }, "SecretStringType":{ "type":"string", "max":65536, "min":0, "sensitive":true }, "SecretVersionIdType":{ "type":"string", "max":64, "min":32 }, "SecretVersionStageType":{ "type":"string", "max":256, "min":1 }, "SecretVersionStagesType":{ "type":"list", "member":{"shape":"SecretVersionStageType"}, "max":20, "min":1 }, "SecretVersionsListEntry":{ "type":"structure", "members":{ "VersionId":{ "shape":"SecretVersionIdType", "documentation":"

The unique version identifier of this version of the secret.

" }, "VersionStages":{ "shape":"SecretVersionStagesType", "documentation":"

An array of staging labels that are currently associated with this version of the secret.

" }, "LastAccessedDate":{ "shape":"LastAccessedDateType", "documentation":"

The date that this version of the secret was last accessed. Note that the resolution of this field is at the date level and does not include the time.

", "box":true }, "CreatedDate":{ "shape":"CreatedDateType", "documentation":"

The date and time this version of the secret was created.

", "box":true } }, "documentation":"

A structure that contains information about one version of a secret.

" }, "SecretVersionsListType":{ "type":"list", "member":{"shape":"SecretVersionsListEntry"} }, "SecretVersionsToStagesMapType":{ "type":"map", "key":{"shape":"SecretVersionIdType"}, "value":{"shape":"SecretVersionStagesType"} }, "Tag":{ "type":"structure", "members":{ "Key":{ "shape":"TagKeyType", "documentation":"

The key identifier, or name, of the tag.

" }, "Value":{ "shape":"TagValueType", "documentation":"

The string value that's associated with the key of the tag.

" } }, "documentation":"

A structure that contains information about a tag.

" }, "TagKeyListType":{ "type":"list", "member":{"shape":"TagKeyType"} }, "TagKeyType":{ "type":"string", "max":128, "min":1 }, "TagListType":{ "type":"list", "member":{"shape":"Tag"} }, "TagResourceRequest":{ "type":"structure", "required":[ "SecretId", "Tags" ], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

The identifier for the secret that you want to attach tags to. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "Tags":{ "shape":"TagListType", "documentation":"

The tags to attach to the secret. Each element in the list consists of a Key and a Value.

This parameter to the API requires a JSON text string argument. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide. For the AWS CLI, you can also use the syntax: --Tags Key=\"Key1\",Value=\"Value1\",Key=\"Key2\",Value=\"Value2\"[,…]

" } } }, "TagValueType":{ "type":"string", "max":256, "min":0 }, "UntagResourceRequest":{ "type":"structure", "required":[ "SecretId", "TagKeys" ], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

The identifier for the secret that you want to remove tags from. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "TagKeys":{ "shape":"TagKeyListType", "documentation":"

A list of tag key names to remove from the secret. You don't specify the value. Both the key and its associated value are removed.

This parameter to the API requires a JSON text string argument. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide.

" } } }, "UpdateSecretRequest":{ "type":"structure", "required":["SecretId"], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret that you want to modify or to which you want to add a new version. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "ClientRequestToken":{ "shape":"ClientRequestTokenType", "documentation":"

(Optional) If you want to add a new version to the secret, this parameter specifies a unique identifier for the new version that helps ensure idempotency.

If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes that in the request. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for new versions and include that value in the request.

You typically only need to interact with this value if you implement your own retry logic and want to ensure that a given secret is not created twice. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.

Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the Lambda rotation function's processing.

This value becomes the VersionId of the new version.

", "idempotencyToken":true }, "Description":{ "shape":"DescriptionType", "documentation":"

(Optional) Specifies an updated user-provided description of the secret.

" }, "KmsKeyId":{ "shape":"KmsKeyIdType", "documentation":"

(Optional) Specifies an updated ARN or alias of the AWS KMS customer master key (CMK) to be used to encrypt the protected text in new versions of this secret.

You can only use the account's default CMK to encrypt and decrypt if you call this operation using credentials from the same account that owns the secret. If the secret is in a different account, then you must create a custom CMK and provide the ARN of that CMK in this field. The user making the call must have permissions to both the secret and the CMK in their respective accounts.

" }, "SecretBinary":{ "shape":"SecretBinaryType", "documentation":"

(Optional) Specifies updated binary data that you want to encrypt and store in the new version of the secret. To use this parameter in the command-line tools, we recommend that you store your binary data in a file and then use the appropriate technique for your tool to pass the contents of the file as a parameter. Either SecretBinary or SecretString must have a value, but not both. They cannot both be empty.

This parameter is not accessible using the Secrets Manager console.

" }, "SecretString":{ "shape":"SecretStringType", "documentation":"

(Optional) Specifies updated text data that you want to encrypt and store in this new version of the secret. Either SecretBinary or SecretString must have a value, but not both. They cannot both be empty.

If you create this secret by using the Secrets Manager console then Secrets Manager puts the protected secret text in only the SecretString parameter. The Secrets Manager console stores the information as a JSON structure of key/value pairs that the default Lambda rotation function knows how to parse.

For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide. For example:

[{\"username\":\"bob\"},{\"password\":\"abc123xyz456\"}]

If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text. You can also 'escape' the double quote character in the embedded JSON text by prefacing each with a backslash. For example, the following string is surrounded by double-quotes. All of the embedded double quotes are escaped:

\"[{\\\"username\\\":\\\"bob\\\"},{\\\"password\\\":\\\"abc123xyz456\\\"}]\"

" } } }, "UpdateSecretResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret that was updated.

Secrets Manager automatically adds several random characters to the name at the end of the ARN when you initially create a secret. This affects only the ARN and not the actual friendly name. This ensures that if you create a new secret with the same name as an old secret that you previously deleted, then users with access to the old secret don't automatically get access to the new secret because the ARNs are different.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret that was updated.

" }, "VersionId":{ "shape":"SecretVersionIdType", "documentation":"

If a new version of the secret was created by this operation, then VersionId contains the unique identifier of the new version.

" } } }, "UpdateSecretVersionStageRequest":{ "type":"structure", "required":[ "SecretId", "VersionStage" ], "members":{ "SecretId":{ "shape":"SecretIdType", "documentation":"

Specifies the secret with the version whose list of staging labels you want to modify. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.

" }, "VersionStage":{ "shape":"SecretVersionStageType", "documentation":"

The staging label to add to this version.

" }, "RemoveFromVersionId":{ "shape":"SecretVersionIdType", "documentation":"

Specifies the secret version ID of the version that the staging label is to be removed from. If the staging label you are trying to attach to one version is already attached to a different version, then you must include this parameter and specify the version that the label is to be removed from. If the label is attached and you either do not specify this parameter, or the version ID does not match, then the operation fails.

", "box":true }, "MoveToVersionId":{ "shape":"SecretVersionIdType", "documentation":"

(Optional) The secret version ID that you want to add the staging label to. If you want to remove a label from a version, then do not specify this parameter.

If the staging label is already attached to a different version of the secret, then you must also specify the RemoveFromVersionId parameter.

", "box":true } } }, "UpdateSecretVersionStageResponse":{ "type":"structure", "members":{ "ARN":{ "shape":"SecretARNType", "documentation":"

The ARN of the secret with the staging label that was modified.

" }, "Name":{ "shape":"SecretNameType", "documentation":"

The friendly name of the secret with the staging label that was modified.

" } } } }, "documentation":"AWS Secrets Manager API Reference

AWS Secrets Manager is a web service that enables you to store, manage, and retrieve, secrets.

This guide provides descriptions of the Secrets Manager API. For more information about using this service, see the AWS Secrets Manager User Guide.

API Version

This version of the Secrets Manager API Reference documents the Secrets Manager API version 2017-10-17.

As an alternative to using the API directly, you can use one of the AWS SDKs, which consist of libraries and sample code for various programming languages and platforms (such as Java, Ruby, .NET, iOS, and Android). The SDKs provide a convenient way to create programmatic access to AWS Secrets Manager. For example, the SDKs take care of cryptographically signing requests, managing errors, and retrying requests automatically. For more information about the AWS SDKs, including how to download and install them, see Tools for Amazon Web Services.

We recommend that you use the AWS SDKs to make programmatic API calls to Secrets Manager. However, you also can use the Secrets Manager HTTP Query API to make direct calls to the Secrets Manager web service. To learn more about the Secrets Manager HTTP Query API, see Making Query Requests in the AWS Secrets Manager User Guide.

Secrets Manager supports GET and POST requests for all actions. That is, the API doesn't require you to use GET for some actions and POST for others. However, GET requests are subject to the limitation size of a URL. Therefore, for operations that require larger sizes, use a POST request.

Support and Feedback for AWS Secrets Manager

We welcome your feedback. Send your comments to awssecretsmanager-feedback@amazon.com, or post your feedback and questions in the AWS Secrets Manager Discussion Forum. For more information about the AWS Discussion Forums, see Forums Help.

How examples are presented

The JSON that AWS Secrets Manager expects as your request parameters and that the service returns as a response to HTTP query requests are single, long strings without line breaks or white space formatting. The JSON shown in the examples is formatted with both line breaks and white space to improve readability. When example input parameters would also result in long strings that extend beyond the screen, we insert line breaks to enhance readability. You should always submit the input as a single JSON text string.

Logging API Requests

AWS Secrets Manager supports AWS CloudTrail, a service that records AWS API calls for your AWS account and delivers log files to an Amazon S3 bucket. By using information that's collected by AWS CloudTrail, you can determine which requests were successfully made to Secrets Manager, who made the request, when it was made, and so on. For more about AWS Secrets Manager and its support for AWS CloudTrail, see Logging AWS Secrets Manager Events with AWS CloudTrail in the AWS Secrets Manager User Guide. To learn more about CloudTrail, including how to turn it on and find your log files, see the AWS CloudTrail User Guide.

" }