86 lines
2.3 KiB
Markdown
86 lines
2.3 KiB
Markdown
|
**Cette page a été importée automatiquement de notre ancien wiki mais n'a pas encore été révisée.**
|
||
|
|
||
|
# Howto GParted
|
||
|
|
||
|
<http://gparted.org>
|
||
|
|
||
|
## Créer un Live USB
|
||
|
|
||
|
<http://gparted.org/liveusb.php>
|
||
|
|
||
|
1. Prendre une clé USB vierge, par exemple /dev/sdz
|
||
|
|
||
|
Si elle n'est pas vierge, l'effacer en faisant quelques secondes :
|
||
|
|
||
|
~~~
|
||
|
# dd if=/dev/zero of=/dev/sdz
|
||
|
^C
|
||
|
~~~
|
||
|
|
||
|
2. Formater la clé USB en dos et créer une partition FAT32 :
|
||
|
|
||
|
~~~
|
||
|
# parted /dev/sdz
|
||
|
|
||
|
(parted) p
|
||
|
Error: /dev/sdz: unrecognised disk label
|
||
|
|
||
|
(parted) mklabel dos
|
||
|
|
||
|
# mkfs.vfat -F 32 /dev/sdz1
|
||
|
~~~
|
||
|
|
||
|
3. Télécharger la dernière version (.zip en amd64) sur <https://sourceforge.net/projects/gparted/files/gparted-live-stable/>
|
||
|
|
||
|
4. Deziper sur le point de montage :
|
||
|
|
||
|
~~~
|
||
|
# mount /dev/sdz1 /mnt
|
||
|
# unzip gparted-live-0.26.1-5-amd64.zip -d /mnt/
|
||
|
~~~
|
||
|
|
||
|
5. Lancer le script suivant en root et suivre les instructions :
|
||
|
|
||
|
~~~
|
||
|
# apt install libc6-i386
|
||
|
# bash /mnt/utils/linux/makeboot.sh /dev/sdz1
|
||
|
This command will install MBR and syslinux bootloader on this machine
|
||
|
--------------------------------------------
|
||
|
Machine: 20BSCT42XY:
|
||
|
Model: SanDisk (scsi)
|
||
|
Disk /dev/sdc: 4005MB
|
||
|
Sector size (logical/physical): 512B/512B
|
||
|
Partition Table: msdos
|
||
|
Disk Flags:
|
||
|
|
||
|
Number Start End Size Type File system Flags
|
||
|
1 1049kB 4005MB 4003MB primary fat32 boot, hidden, lba
|
||
|
|
||
|
--------------------------------------------
|
||
|
Are you sure you want to continue?
|
||
|
[y/n] y
|
||
|
OK! Let's do it!
|
||
|
--------------------------------------------
|
||
|
File system of /dev/sdc1: vfat
|
||
|
--------------------------------------------
|
||
|
Do you want to install mbr on /dev/sdc on this machine "20BSCT42XY" ?
|
||
|
[y/n] y
|
||
|
OK! Let's do it!
|
||
|
--------------------------------------------
|
||
|
Do you want to install the SYSLINUX bootloader on /dev/sdc1 on this machine "20BSCT42XY" ?
|
||
|
[y/n] y
|
||
|
OK! Let's do it!
|
||
|
A filesystem supporting Unix file mode for syslinux is required. Copying syslinux from FAT to /tmp/...
|
||
|
'/mnt/utils/linux/syslinux' -> '/tmp/syslinux_tmp.ZISOfr/syslinux'
|
||
|
Running: /tmp/syslinux_tmp.ZISOfr/syslinux -d syslinux -f -i /dev/sdc1
|
||
|
done!
|
||
|
//NOTE// If your USB flash drive fails to boot (maybe buggy BIOS), try to use "syslinux -d syslinux -fs /dev/sdc1", i.e. running with "-fs".
|
||
|
|
||
|
~~~
|
||
|
|
||
|
6. umount et c'est prêt !
|
||
|
|
||
|
~~~
|
||
|
# umount /mnt
|
||
|
# sync
|
||
|
~~~
|