18
0
Fork 0

Mise a jour en Debian Jessie

This commit is contained in:
vlaborie 2017-03-09 15:16:40 +01:00
parent 52e620ddc8
commit 5e9896523d
1 changed files with 54 additions and 60 deletions

View File

@ -1,92 +1,86 @@
**Cette page a été importée automatiquement de notre ancien wiki mais n'a pas encore été révisée.**
---
categories: bios raid
title: Serveur HP / RAID
...
## Accéder au BIOS
Appuyer sur F8 au bon moment : <http://medicblog.net/?p=531>
Appuyer sur F9 au bon moment
# Installer l'utilitaire
Tout d'abord, en 64bits, installer les librairies de compatibilité 32bits :
## Installer l'utilitaire
~~~
root@~> aptitude install ia32-libs
# echo "deb http://downloads.linux.hpe.com/SDR/repo/mcp/ jessie/current non-free" > /etc/apt/sources.list.d/hp.list
# curl https://downloads.linux.hpe.com/SDR/hpPublicKey1024.pub | apt-key add -
# curl https://downloads.linux.hpe.com/SDR/hpPublicKey2048.pub | apt-key add -
# curl https://downloads.linux.hpe.com/SDR/hpPublicKey2048_key1.pub | apt-key add -
# apt update
# apt install hp-health hpssacli
~~~
Une fois fait, on va télécharger leur utilitaire. Dans le code source de [page](http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121486&swItem=MTX-799829d8271f455d9367978b5a&prodNameId=3288144&swEnvOID=4033&swLang=8&taskId=135&mode=4&idx=1|cette) trouvez le chemin exact pour le récupérer avec _wget_ (au moment où je rédige ces lignes, le chemin est ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1976866454/v55141/HP_ProLiant_Value_Add_Software-8.25-19-12.iso).
## Récupérer les informations des disques
Téléchargez l'ISO sur le serveur :
Récapitulatif des disques virtuel et physiques :
~~~
root@~> wget ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1976866454/v55141/HP_ProLiant_Value_Add_Software-8.25-19-12.iso
# hpssacli ctrl all show config [detail]
Smart Array P440ar in Slot 0 (Embedded) (sn: PDNLH0BRH8B0XM)
Port Name: 1I
Port Name: 2I
Internal Drive Cage at Port 1I, Box 1, OK
Internal Drive Cage at Port 2I, Box 0, OK
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (558.7 GB, RAID 1+0, OK)
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 300 GB, OK)
~~~
Ensuite, monter l'ISO pour récupérer le paquet et l'installer (adapter à la version et l'architecture) :
~~~
root@~> mkdir hp_cd
root@~> mount -o loop HP_ProLiant_Value_Add_Software-8.25-19-12.iso hp_cd
root@~> cp hp_cd/pool/non-free/hpacucli_8.28-13.0.10-9_amd64.deb /tmp
root@~> cd /tmp
root@/tmp/> dpkg -i hpacucli_8.28-13.0.10-9_amd64.deb
~~~
Voilà, l'utilitaire est installé !
# Récupérer les informations des disques
Pour récupérer les informations sur le tableau RAID, on commence d'abord par connaître le n° de tableau dans lequel se trouve notre disque
~~~
root@~> hpacucli
=> ctrl all show config
Smart Array P400i in Slot 0 (Embedded) (sn: PH78MV8884 )
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (136.7 GB, RAID 1, Interim Recovery Mode)
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, Failed)
~~~
On voit bien le tabeau RAID avec l'ID 0, et deux disques physiques qui composent notre disque logique, dont l'un des deux est noté *Failed*
Ensuite, pour trouver le n° de série du disque, on prend sont ID de disque physique (1I:1:2) et on demande ses informations dans le tabeau RAID 0
~~~
=> controller slot=0 physicaldrive 1I:1:2 show
# hpssacli controller slot=0 physicaldrive 1I:1:2 show
Smart Array P400i in Slot 0 (Embedded)
Smart Array P440ar in Slot 0 (Embedded)
array A (Failed)
array A
physicaldrive 1I:1:2
Port: 1I
Box: 1
Bay: 2
Status: Failed
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 146 GB
Rotational Speed: 10000
Firmware Revision: HPD5
Serial Number: 3NM27MPQ00009750M7C4
Model: HP DG146ABAB4
PHY Count: 1
PHY Transfer Rate: 3.0GBPS
Size: 300 GB
Drive exposed to OS: False
Native Block Size: 512
Rotational Speed: 15000
Firmware Revision: HPD2
Serial Number: 0TG8T4GP
Model: HP EH0300JDYTH
Current Temperature (C): 41
Maximum Temperature (C): 52
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
Drive Authentication Status: OK
Carrier Application Version: 11
Carrier Bootloader Version: 6
Sanitize Erase Supported: False
~~~
Pour avoir plus de détails :
~~~
=> ctrl all show config detail
Smart Array P410i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
[...]
~~~
# Mettre à jour le firmware
## Mettre à jour le firmware
Récupérer le firmware sur le support HP, il s'agit d'un script BASH auto-extractible. Executez-le et suivez les instructions.