diff --git a/SwitchCisco.md b/SwitchCisco.md
index e6cd4448..fc2710d5 100644
--- a/SwitchCisco.md
+++ b/SwitchCisco.md
@@ -1603,6 +1603,47 @@ Switch(config)# snmp-server community private use-ipv4acl snmp-rw
Switch(config)# snmp-server community private group ifXTable_only
~~~
+### STP : Spanning Tree Protocol
+
+* Synchro immédiate : Spanning Tree Portfast => Spanning Tree Port Type Edge
+
+Le nom "portfast" n'existe pas sous Nexus, c'est une notion de "port type" qui est utilisé. Lorsque le port est connecté à une machine finale, c'est un port de type `edge` (de bord, d'extrémité).
+
+Activer le Port Type Edge :
+
+~~~
+Switch(config)# interface GigabitEthernet0/28
+Switch(config-if)# spanning-tree port type edge
+~~~
+
+Désactiver le Port Type Edge :
+
+~~~
+Switch(config)# interface GigabitEthernet0/28
+Switch(config-if)# no spanning-tree port type edge
+~~~
+
+### SPAN : Switch Port Analyzer (Port mirroring)
+
+Activer le port mirroring, en copiant la sortie des ports Eth1/1 à Eth1/3 vers le port Eth1/5 :
+
+~~~
+Switch(config)# interface ethernet 1/5
+Switch(config-if)# switchport monitor
+Switch(config-if)# exit
+Switch(config)# monitor session 1 type local
+Switch(config-monitor)# source interface ethernet 1/1-3 tx
+Switch(config-monitor)# destination interface ethernet 1/5
+Switch(config-monitor)# no shut
+~~~
+
+Désactiver le port mirroring en gardant la configuration :
+
+~~~
+Switch(config)# monitor session 1 type local
+Switch(config-monitor)# shut
+~~~
+
### Cron / tâches planifiées
Exemple pour sauvegarder périodiquement la configuration du switch :
@@ -1631,26 +1672,6 @@ Switch(config-schedule)# job name backupConfig
Switch(config-schedule)# time daily 01:15
~~~
-### STP : Spanning Tree Protocol
-
-* Synchro immédiate : Spanning Tree Portfast => Spanning Tree Port Type Edge
-
-Le nom "portfast" n'existe pas sous Nexus, c'est une notion de "port type" qui est utilisé. Lorsque le port est connecté à une machine finale, c'est un port de type `edge` (de bord, d'extrémité).
-
-Activer le Port Type Edge :
-
-~~~
-Switch(config)# interface GigabitEthernet0/28
-Switch(config-if)# spanning-tree port type edge
-~~~
-
-Désactiver le Port Type Edge :
-
-~~~
-Switch(config)# interface GigabitEthernet0/28
-Switch(config-if)# no spanning-tree port type edge
-~~~
-
### VPC : Virtual Port-Channel
Ressources : ,