**Cette page a été importée automatiquement de notre ancien wiki mais n'a pas encore été révisée.** Télécharger le binaire 32bits suivant (on prendra soin d'installer les ia32-libs avant) : [] Lancer le binaire et suivez ce qui suit : ~~~ machine:~> ./lsiutil LSI Logic MPT Configuration Utility, Version 1.38, July 6, 2005 1 MPT Port found Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev 1. /proc/mpt/ioc0 XXXXXX XXX XXX Select a device: [1-1 or 0 to quit] 1 1. Identify firmware, BIOS, and/or FCode 1. Download firmware (update the FLASH) 1. Download/erase BIOS and/or FCode (update the FLASH) 1. Scan for devices 10. Change IOC settings (interrupt coalescing) 13. Change SAS IO Unit settings 16. Display attached devices 20. Diagnostics 21. RAID actions 22. Reset bus 23. Reset target 30. Beacon on 31. Beacon off 97. Reset SAS phy 98. Reset SAS link 99. Reset port Main menu, select an option: [1-99 or e for expert or 0 to quit] 21 1. Show volumes 1. Show physical disks 1. Get volume state 23. Replace physical disk 30. Create volume 31. Delete volume 32. Change volume settings RAID actions menu, select an option: [1-99 or e for expert or 0 to quit] 32 Volume: [0-1 or RETURN to quit] 0 Volume 0 Settings: write caching disabled, auto configure, priority resync Volume 0 draws from Hot Spare Pools: Enable write caching: [Yes or No, default is No] Yes Offline on SMART data: [Yes or No, default is No] Auto configuration: [Yes or No, default is Yes] Priority resync: [Yes or No, default is Yes] Hot Spare Pools (bitmask of pool numbers): [00 to FF, default is 01] RAID actions menu, select an option: [1-99 or e for expert or 0 to quit] 0 Main menu, select an option: [1-99 or e for expert or 0 to quit] 0 Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev 1. /proc/mpt/ioc0 LSI Logic SAS1068 B0 105 000a310 Select a device: [1-1 or 0 to quit] 0 ~~~ Rebootez la machine pour que les modifications prennent effet !